Long description

Part (a): The horizontal block with nine segments ranges from 0 to 31 in increments of 1 unit. The segments are labeled from left to right as follows. A, blank, B, C, blank, D, E, blank, blank. The blank segments except the last one are shaded.

Part b: A vertical block consisting of five rows are shown below the left end of the previous block. The rows from bottom are labeled as follows: blank, 1 1 1 1 1 0 0 0, 1 1 0 0 1 1 1 1, 1 1 1 1 1 1 1 1, 1 1 1 1 1 0 0 0. Five arrows are pointed from this block to the segment A of previous block and another three arrows point to the segment B.

Part c: Eight horizontal blocks consisting of four segments are shown here. The segments of each block are labeled as follows: Segment 1: P, O, S blank. Segment 2: H, S, 3, blank. Segment 3: P, 8, 6, blank, Segment 4: P, 14, 4, blank. Segment 5: H, 18, 2, blank. Segment 6: P, 20, 6, blank. Segment 7: P, 26, 3, blank. Segment 8: H, 29, 3, X. These blocks are connected from left to right using arrows. Here the P represents process, H represents hole, the second and third column represents starts at and length, respectively.